[KERNEL] [TW/CM]EMOTION[SM-N910-F-G-P-T-V][24-JUN-2016][6.0.1]Emotroid Team

Voir le sujet précédent Voir le sujet suivant Aller en bas

[KERNEL] [TW/CM]EMOTION[SM-N910-F-G-P-T-V][24-JUN-2016][6.0.1]Emotroid Team

Message par yoda le Lun 27 Juin - 14:57

Merci à Pafcholini, 

Kernel compatible with SM-N910F SM-N910G SM-N910P SM-N910T SM-N910V "Note 4"
SM-N915F SM-N915G SM-N915P SM-N915T "Note Edge"
Based on Samsung Open Source Code
Kernel compatible with TW and CM
Compiled with Toolchain Linaro GCC 5.1.2 Stable
Linux version 3.10.94
CPU OC/UC -> 3072MHz / 268MHz
GPU OC/UC -> 800MHz / 166MHz
PowerSuspend Driver
Intelli-Plug V5.1
MSM Zen Decision
KSM enabled
Wake Gestures (DT2W, DT2S, S2W, S2S)
Adreno idler Algorithm
Simple GPU Algorithm
Voltage Control
KCAL - Advanced color control
Led Control / Fading
CRC Settings
Advanced TCP control
S-View flip cover hack
Selinux Permissive
CIFS Support
NTFS Support
LZ4 compression algorithm
Kali NetHunter Support
Reduced wakelocks
Frandom number generator
Kernel Adiutor
Governors: Barry-Allen, interactive_pro, intelliactive, bluactive, conservativex, alucard,darkness, nightmare, smartassV2, ondemandplus, umbrella_core, yankactive, dancedance, bioshock, lionhearth, conservative, interactive, ondemand,powersave, userspace, performance, impulse, zzmoove
I/O Scheldures: bfq, vr, fiops, zen, fifo, sio, test-ioshed, cfq, row, deadline, noop

Juin-24-2016 bêta r25 -Première diffusion de Marhsmallow -toutes les fonctionnalités de LP Dans le lien de téléchargement vous trouverez le noyau, supersu zip (dans le cas où vous perdez le reflash juste racine le zip supersu) et noyau adiutor !
ancienne versions:
January- 1 -2016 nightly r23
-Kernel reworked
-Kernel works for F, G, P, T and probably W8 variants. (Note 4 and Note edge)
-Linux 3.10.94
-Based on DOK2 source code
-No more Synapse support, we moved to Kernel Adiutor (KA)
-Interactive governor improved
-mdss updates
-timer fixes
-Added touchboost (thanks to franco for the code) for Interactive (probably we'll add it for more governors)
-Fixed mpdecision issue (mpdecision has to keep 2 cores online always)
-Selinux updates
-Enabled pstore/ramoops dump for kernel panics (/sys/fs/pstore/console-ramoops)
-Added f2fs support (You need a recovery that support full f2fs)
-Net updates
-Ram managment improved
-Sched updates
-and a lot of CAF patches,etc.
-Checkout our github for more information

September- 23 -2015 nightly r21
-Linux 3.10.89
-Enabled HMP (Only for CM kernel)
-dt2w: prevent touches during phone calls
-Fixed fast charger
-Probably fixed random reboots while charging (need more feedbacks)
-Zzmoove back to beta7 (looks the best for the Note 4)
-Makefile: added optimizations
-Kcal updates and fixex (thanks to fflokes)
-Fixed some thermal issues
-Added option to disable ipv6 (seems to cause wake ups while wifi is connected,just for some routers)
-Another small changes and fixes, check out our github

September- 6 -2015 nightly r20
-Kernel based on COG5 (Android 5.1.1)
-Kernel 5.1.1 compatible with SM-N910F, SM-N910P and SM-N910T
-Compiled with Christopher83 Toolchain Linaro GCC 4.9.4 Cortex A15
-Kernel rebased from beginning and revised all the changes
-Cleaned unnecessary code and patches
-All the features from r19 are present
-Reverted UKSM (Caused some memory issue)
-Reverted Wifi PM (Caused issues)
-Swap set to stock (1280mb)
-Small fixes, etc.

August- 24 -2015 nightly r19
-Linux 3.10.87
-Kernel compatible with CM
-Makefile optimizations
-Wake Gestures:
"Double tap 2 wake
Double tap 2 sleep ( Control to allowed the width and height)
Sweep 2 wake
Sweep 2 sleep
Wake Gestures
Vibration Strength
Wake timeout"
-Wifi Calling fixed (T-Mobile variant)
-Proximity sensor during calls fixed (Sprint variant)
-LZ4 patches
-workqueue improvements and fixes
-Introduced new flag WQ_POWER_EFFICIENT for power oriented workqueues
-ext4 improvements and fixes
-PM QoS: Add GPU frequency limits to PM QoS and another patches
-Added UKSM
-mm/rmap made rmap_walk to get the rmap_walk_control argument
-cpufreq: Disable light-weight init/teardown during suspend/resume
-Added MSM Hotplug driver (neobuddy89)
-Added Bricked Hotplug Driver
-Intelli-plug updated (neobuddy89)
-cpu-boost: Several optimizations
-Added Sioplus & tripndroid
-msm: mdss fixes and patches
-Added option to change the SELinux status
-cpufreq: added darnkess, nightmare and pegasusq governor updated the newer cpufreq driver to support "older" governors credits for the 3 -governors: Alucard24
-bcmdhd4358: WIFI PM support for KitKat driver [halaszk]
-bcmdhd: reduce rx wakelock timeout via sysfs node
-qcom: Update clock vote for improved performance
-Reworked voltage tables to reduce overload
-qcom:apq8084: reduced the maximum current for each frequency
-arm/dt: 8084: Drop retention voltages/Drop min allowable voltage (Thanks to XileForce)
-Reduced lower constraint for GPU (Flar2)
-frandom updates
-Synapse: changes, fixes, new tabs, etc. (thanks to UpInTheAir for some nice codes)
-For more info and changes check out our GITHUB

Jule- 28 -2015 nightly r18
-Linux 3.10.84
-Compiled with UBERTC Toolchain 5.2
-Source and ramfs updated to POF2
-Speed up console framebuffer imageblit function
-Fixed ZeroLemon Fuel Gauge (Thanks to TheLoneWolf20)
-Reverted some commits from r17
-Fix stuck CPU frequencies (Thanks to gekkehenkie11)
-qseecom: updates
-msm_hsic_host: reduce wakelock
-Crypto: updates and fixes
-dm: updates and fixes
-Added PFT (Per-File-Encryption)
-inr_sqrt: improved 3x faster integer sqrt and correction square root algo with naming
-mhi: fixed building of mhi driver
-Reverted Kali NetHunter (For now)
-Interactive: updates
-Added impulse governor and changed part of the code by neobuddy89
-Added zzmoove governor
-Added lcd_notify
-Sweep2wake: added s2s_only and sweep from left to right
-Row I/O: added magic values by Franco
-Synapse: updates, fixes and added Adreno idler
-For more info and changes check out our github

June- 28 -2015 nightly r17
-Linux 3.10.81
-Kernel compiled with Linaro Toolchain 5.1
-Added adreno idler algorithm by Arter97
-Sweep2wake works (Now we have sweep2wake and sweep2sleep)
-Hardlimit 2.2 Emotion Edition for Note 4 (Cleaned to be pure hardlimit)
-Google play services wakelock fixed
-bluesleep: reduced wakelock
-pinctrl: msm: Enabled irqs on resume
-wireless: dhd: Enable standby ARP and multicast packet filters
-Allow untrusted apps to read from debugfs
-input: keyboard: qpnp-keypad: register private data in SPMI dev
-mhi: core: Fix double increment on event counter and removed useless atomic variables
-Swap up to 1.5GB
-Add some tweaks for performance from LSpeed Mod
-net: wireless: bcmdhd4358: Fixed failure to enter PS
-frandom: Dynamically allocate the char device numbers and clear up checkpatch conflicts
-msm: mdss: update and fixes from codeaurora patches
-binder: Quiet Binder and Ratelimit binder debug messages
-ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
-block: BFQ updated to V7r8 for 3.10.X
-USB: android: Fix memory leak in mass_storage_function_init()
-cpuidle: updates and fixes from Linaro patches
-Fast charge adapted and fixed for Note 4 (Thanks to yank555.lu and ktoonsez for the initial code)
-cpufreq: Prevent mpdecision changing scaling freq
-qcom-cpufreq: updates and fixes
-Barry Allen updated to 1.0
-PM: devfreq: Fix show available freqs
-msm:kgsl: fixes
-msm: vidc: updates and fixes from codeaurora patches
-Added msm zen decision (replacement for MPDecision)
-force -Os -std=gnu89 and don't use GCC wrapper for GCC 5.1+
-Makefile: Additional Optimizations
-gpio_keys: force sync on KEY_POWER, KEY_HOME press (This should help in situations when the device or the OS is stalled but the kernel is alive and running.)
-arm: added arm optimized memcmp and Krait optimized strcmp
-readahead: make context readahead more conservative
-dtsi: fixed 268MHz frequency
-mm: zswap: fixes
-Synapse: clean up and fixes
-For more details check out our source code

June- 2 -2015 nightly r16
-Linux updated to 3.10.79
-Added LED Control/fading available in Synapse (Thanks to @UpInTheAir and halaszk)
-SM-N910F kernel is compatible with SM-N910G variant (BOE1+ firmware)
-SM-N915P (Note edge sprint variant) compatible
-Fix screen brightness issues: workaround for KK bootloaders not reporting the panel name (SM-N910V kernel)
-arm: vfpmodule: Fixed warning procfs vfp_bounce reporting failed
-dts: msm: disabled support of 50MHz for i2c for apq8084
-GPU Overclock and Underclock to 800MHz/166MHz
-GPU reduced frequency on boot from 300MHz to 266MHz
-msm: kgsl: show current power level
-suspend: Return error when pending wakeup source is found
-Barry Allen governor updated to 0.7
-mmc: sdhci-msm: Added Samsung 64G search after tune quirk
-Compile with -O3 flag
-KCAL updated (Fixed some issues)
-kernel/smp.c: fixed memory leak
-Default to NOATIME and NODIRATIME for FS performance improvement
-Optimized copy_page for modern ARM platforms
-cpufreq: Added stop CPU callback to cpufreq_driver interface
-PM: Introduce suspend state PM_SUSPEND_FREEZE
-PM / suspend: Make cpuidle work in the "freeze" state
-power: Adds functionality to log the last suspend abort reason
-ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state
-power: catch wake-up requests in suspend_again
-PM / sleep: fix freeze_ops NULL pointer dereferences
-dm-req-crypt: Free resources in destructor
-qce50: Update clock vote for improved performance
-Optimized kernel size
-scheduler: update to BFQ-v7r7 for 3.10.8+
-suspend: Return error when pending wakeup source is found
-msm: kgsl: Add check to protect against operating on NULL pointer
-msm: kgsl: Avoid a possible NULL reference in kgsl_ioctl_helper
-futex: Add another early deadlock detection check
-Synapse added in the zip

May- 18 -2015 nightly r15
-Linux updated to 3.10.78
-Added compatibility to SM-N915-F-G-T (Note Edge)
-Added SWAP to 1.4gb
-Added support to Kali NetHunter (Thanks to FutureBSD and thehacker911)
-cpufreq: Added if cpu is online check in show
-cpufreq: Protect against hotplug in cpufreq_register_driver()
-cpufreq: Fixed timer/workqueue corruption by protecting reading governor_enabled
-Revert "cpufreq: make the "scaling_cur_freq" sysfs entry pollable"
-cpufreq: Use correct locking for cpufreq_cpu_data
-cpufreq: Return directly in __cpufreq_get if policy is NULL
-cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
-cpufreq: governor: removed copy_prev_load from 'struct cpu_dbs_common_info'
-cpufreq: removed race while accessing cur_policy
-DriveDroid support (DEFAULT, MTP, PTP, UMS)
-Increased swappiness from 60 to 70
-Improved performance
-NTFS fixed
-Updated Ramfs to BOD2
-Added USB mode in Synapse
-Profiles updated in Synapse
-Fixed gamma and lmk profiles
-Added stock profile in Synapse
-Another minor changes and fixes

May- 11 -2015 nightly r14
-Linux updated to 3.10.77
-Selinux back to full permissive (Fixed gear vr compatibility, etc.)
-WIFI optimized (Thanks to @javilonas)
-Fixed T-Mobile Synapse compatibility
-Crypto: Updated to armv7-a Neon
-Busybox updated to 1.23.2 to fix some issues with Synapse
-Fixed all known bugs from r12+1
-Fixed some minor bugs in the ramfs
-Another minor fixes

May- 8 -2015 nightly r13
-Linux updated to 3.10.76
-Kernel compatible with SM-N910T
-Reverted "power: make sync on suspend optional"
-KCAL updated
-The kernel boot on Selinux enforcing but you can change the status from Synapse
-qcom-cpufreq: Removed save/restore of scheduling policy
-cpufreq_interactive: updated again from Shamu source
-cpufreq: stats: Don't update cpufreq_stats_table if it's NULL
-cpufreq: Break out early when frequency equals target_freq
-msm: lpm-levels: add suspend_again handler
-msm: Fix high load average from uninterruptible waits
-qcom: mpm-of: fix bug in finding the pending interrupts
-Added new governor Barry-Allen by Javilonas
-CIFS and NTFS built in the kernel
-Ramfs optimized (New tweaks,etc. thanks to Javilonas for some scripts)
-Synapse support KCAL control
-Added profiles in Synapse
-Added profiles for LMK in Synapse
-Added global voltage control in Synapse
-Change Selinux status from Synapse>MISC
-Fixed some bugs in Synapse

April- 23 -2015 nightly r12
-Kernel compatible with SM-N910F SM-N910G SM-N910P SM-N910V
-Based on BOC3
-Linux updated to 3.10.75
-Fixed random reboots for some users
-Added crypto optimized SHA-256/224
-percpu: implemented generic percpu refcounting
-mm: disabled zone_reclaim_mode by default
-mm: reordered can_do_mlock to fix audit denial
-Enabled Zram with lz4 compression by default (Synapse>Kernel Tweaks)

April- 18 -2015 nightly r11
-binfmt_elf.c: use get_random_int() to fix entropy depleting
-Reverted "sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire" (Thanks to andip71 to report the lag)
-arm/kernel/irq.c: removed irq affinity warnings
-Restored CPU frequency during resume
-Silenced some annoying last_kmsg
-futexes: Increase hash table size for better performance
-Improved/fixed some typos in the ramfs
April- 15 -2015 nightly r10
-Compiled with Linaro GCC 4.9 2015.03 Cortex A15
-Linux updated from 3.10.40 to 3.10.74
-Compression changed to LZ4
-Power: made sync on suspend optional

April- 12 -2015 nightly r9
-Back to Linux 3.10.40 (For now, we are working to bring stable 3.10.73)
-Added Intelli-thermal v3.0
-bcmdhd4358: filter multicast packages while suspended
-fs/namei.c: fix potential memory leak in path_lookupat
-pinctrl: msm: fixed potential NULL pointer dereference
-usb: ks_bridge: by default debugging is disabled
-slub: fix kmem_cache_shrink return value
-mm: slub: fixed format mismatches in slab_err() callers
-power:Enable/Disable power collapse after camera open
-Implemented CPU Core Control by andip71
-tick: don't update idle time if cpu offline
-msm: kgsl: Only wake GPU on multitouch events
-Interactive: don't boost cpu if already boosted
-rtc: qpnp-rtc: Sets RTC time correctly
-rtc: qpnp-rtc: Set alarm control register properly
-Added Mobile Storage Analyzer
-soc: mbhc: Fix ID Tech card reader detection
-power: catch wake-up requests in suspend_again
-pinctrl: msm: prevent bogus wake up from suspend
-asoc: wcd9xxx: Improved headset detection
-Implemented Motorola MSM memcpy enhancements "memutils" (Faster memcpy performance for Krait)
-Improved Memutils
-Added CIFS as module
-Adde NTFS as module
-ASoC: msm: qdp6v2: handle proxy read failure
-ASoC: msm: qdsp6v2: Fix timestamp query during gapless transition
-mmc: core: Update PON (Power Off Notification) based on the system state
-mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
-netfilter: IDLETIMER: fix invalid deference of timer
-Fixes and improvements in Synapse
-Added CPU Binning (pvs information) Synapse> CPU VOLTAGE
-Added CPU core control in Synapse> CPU DRIVERS
-For more info check our Github

March- 27 -2015 nightly r8
-Linux update to 3.10.71
-Powesuspend updated to 1.7
-Intelli-plug updated to 4.0
-OC/UC -> 3072MHz / 268MHz
-Added Hardlimit Control
-Added new governors
-Addeded new scheldures
-Added memcopy & string use glibc version
-Added quickwakeup driver (improve battery life)
-Optimized Kernel Samepage Merging (KSM)
-deadline: Optimized for non-rotational
-mm: Clear page active before releasing pages
-ARM: 8119/1: crypto: sha1: add ARM NEON implementation
-ARM: 8120/1: crypto: sha512: add ARM NEON implementation
-ARM: crypto: add NEON accelerated XOR implementation
-ARM: add support for kernel mode NEON and only allow kernel mode neon with AEABI
-Fixed failure to enter PS mode while roaming
-Sched: Set MC (multi-core) sched domain's busy_factor attribute to 1
-Disabled add_random for more performance on SSD's
-tcp: enabled tcp fast open functionality (franciscofranco)
-For more info check our Github

March- 5 -2015 nightly r7
-Added KCAL - Advanced color control (Thanks to @savoca for his great job) check this thread for more info

March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Based on XXU1BOB4 (Lollipop version) and compatible with "F"
-Lollipop version has all the features except mdnie control and S-View hack
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes

January- 27 -2015 nightly beta r5
-FauxSound implemented
-FauxSound in Synapse
-Added high performance mode in Synapse->Sound
-Fixed battery drain on wifi (My fault)
-Reverted another commits

January- 16 -2015 nightly r4
-Fixed cpu voltage control (No more 0MHz frequency in cpu voltage table)
-ASoC: wcd9xxx: use hwdep node for codec calibration
-ASoC: wcd9320: use hwdep nodes to get calibration
-ASoC: wcd9xxx: Changes for High performance mode
-ASoC: wcd9xxx: Change PA on and VDDIO switch sequence
-ASoC: wcd9xxx: Avoid micbias glitches during audio playback
-In conclusion better quality sound on headsets
-Sched/fair: reduced latency
-Decreased DHD_PACKET_TIMEOUT_MS to 250 ms (Before 500ms)
-Drecreased time to enter sleep
-Net: wireless: Increased scan entry expiration to fit new scan time
-PM: devfreq: Use high priority workqueue
-Msm: kgsl: Report correct GPU frequency in sysfs
-Some minor changes

January- 11 -2015 nightly r3
-Added Frandom as module and set by default (Synapse>I/O>Frandom) "For more info check this"
-Network speed tweak
-Reduced wakelocks "wlan_rx_wake" and "wlan_ctrl_wake"
-dtsi: realigned voltages with userspace values (Thanks to twistedumbrella)
-cpu-boost more performance (Thanks to franciscofranco)
-sched: LOAD_FREQ (4*HZ+61) "For more info check this"
-Interactive governor imported from the Nexus 6 (No more lag on interactive)
-Added bluactive and interactive_pro governors
-Reverted some changes that made the kernel laggy in some cases.
-Selinux set to permissive by default
-Gpu: msm: for higher priority you want to use nice level of -7
-Now you can change the governor tunables from Synapse (Issue fixed) (Thanks for the tip to AndreiLux)
-Synapse shows all the available gpu governors (Thanks to my friend Friedrich!)
-Cleaned some things in Synapse
-Other minor changes

January- 4 -2015 nightly r2
-Fixed Ondemand governor
-mm: slub: Default slub_max_order to 0 (Improved performance)
-Increased io performance
-writeback: fix occasional slow sync
-Fixed min frequency (Finally!)
-msm: Fix high load average from uninterruptible waits
-Cpu boost sysfs to enable/disable it (Synapse>cpu drivers)
-S-View hack (Twistedumbrella) enable/disable (Synapse>miscellaneous)
-Minor fixes

January- 1 -2015 nightly r1
-Based on Samsung Open Source N910FXXU1ANIE
-Compiled with Toolchain Linaro GCC 4.9.3 2014.12 Cortex A15
-PowerSuspend Driver
-Intelli-Plug V3.9
-Stereo Call Recording Support
-cpufreq_limit: don't override cpu min frequency
-Fast Charge V1.2
-Simple GPU Algorithm
-Sysfs interface to Enable/Disable Logger Android (Default disable)
-Voltage Control
-Intelli-Thermal V1
-mDNIe Hijack control
-Advanced TCP control (westwood default)
-Sysfs interface to Enable/Disable CRC
-Dynamic Fsync Control V1.5
-Added Intelliactive, Smartmax and SmartassV2 governors
-Led Control
-Panel Color Control
-mDnie mode adapter for Synapse
-Selinux Enforcing/Permissive
-Synapse Support

Avoir rooté son mobile sous MashMallow et installer un recovery custom
Arrow TUTO

Kernel emotion r 25 beta + Apk Adiutor + super su 2.74

Installation du kernel via le recovery custom

Copier/coller le fichierKernel emotion r25 bêta que vous avez téléchargé dans la mémoire interne ou externe de votre téléphone.
2 Téléphone éteint, redémarrer en mode recovery ( volume haut + home + power )
3 Allez dans Backup & restore, puis choississez Backup pour faire une sauvegarde de votre système actuel
4 Sélectionnez Install .zip from sdcard.
5 Sélectionnez le fichier du kernel emotion
6 Faite un wipe dalvik et cache (pas obligatoire mais recommandé)
7 Sélectionnez Reboot System Now dans le menu Recovery pour redémarrer votre téléphone.

Installation de Kernel Adiutor

1 Copiez l'apk sur votre carte sd
2 Installez l'apk

Très important

Une fois votre kernel installé vous risquez de perdre le root, il faut juste que vous flashiez super su 2.74 avec le recovery custom et tout rentre dans l'ordre

L'équipe du forum attend vos retours  Cool

Dernière édition par yoda le Lun 27 Juin - 17:03, édité 3 fois

Messages : 1100

Revenir en haut Aller en bas

Re: [KERNEL] [TW/CM]EMOTION[SM-N910-F-G-P-T-V][24-JUN-2016][6.0.1]Emotroid Team

Message par dls7882 le Lun 27 Juin - 14:59

Hello et merci pour le tutoriel. T'es rapide comme l'éclair frime


                             Note4      S5     S4     S2



Messages : 1547

Revenir en haut Aller en bas

Re: [KERNEL] [TW/CM]EMOTION[SM-N910-F-G-P-T-V][24-JUN-2016][6.0.1]Emotroid Team

Message par bydyphil le Lun 27 Juin - 23:25

pour le partage

Samsung Galaxy S6 edge G925F Fiche technique
Rom - EdYoblue N. V1.2

Merci de poser vos questions techniques SUR LE FORUM. Je ne répondrai pas aux messages privés non sollicités.


Messages : 1118

Revenir en haut Aller en bas

Re: [KERNEL] [TW/CM]EMOTION[SM-N910-F-G-P-T-V][24-JUN-2016][6.0.1]Emotroid Team

Message par yoda le Mar 28 Juin - 9:48

C'est un plaisir les amis Cool


Galaxy note 4 N 910F /HUAWEI mate 9 MHA-L29C432B182
Tablette :Samsung Galaxy Tab A6 - SM-T585NZWAXEF
ROM:DLS ROM DPJ3 (6.0.1 Marshmallow)
Root supersu 2.79 et xposed
Recovery custom TWRP



Messages : 1100

Revenir en haut Aller en bas

Re: [KERNEL] [TW/CM]EMOTION[SM-N910-F-G-P-T-V][24-JUN-2016][6.0.1]Emotroid Team

Message par Contenu sponsorisé

Contenu sponsorisé

Revenir en haut Aller en bas

Voir le sujet précédent Voir le sujet suivant Revenir en haut

Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum